Key Features
- 110% bunded in accordance with Environment Agency PPG2 (Pollution Prevention) Guidelines
- For use with Avgas and Jet A-1
- Stainless steel inner tank
- Double skinned integrally bunded construction
- Built in accordance with CAA guidelines for aircraft re-fuelling equipment
- High security specification
- Industry leading warranty
Standard Specification
Specification includes:
Dispensing equipment
- Tough, fully baffled stainless steel double skin tank
- Rear access steps to manway / inspection hatch
- Lockable cabinet housing pumping equipment with roller shutter door
- Lockable cabinet housing dispensing equipment with roller shutter door
- Overfill prevention system
- Integral steel chassis with spring steel suspension
- Fixed rear axle, front axle on turntable for steering, with 385/65/R22.5 wheels and tyres
- Air and hydraulic operated brake system with manual handbrake
- Fitted with an automatic suction breather and pressure relief valve
- Shot blasted to SA 2.5 and painted in 2-pack polyurethane finish
- Pressure vacuum vent/turnover valve
Dispensing equipment
- Piusi EX50 12Vdc electric driven vane pump
- Flow rate approximately 45Lpm*
- Facet VF-22SB filter vessel tested to EI/API 1581 (5th edition).
- FG-0-612-2 filter cartridge to EI/API 1583 (4th edition) (particle & water blocking, 0.5 micron)
- Differential pressure gauges
- Water drain on filter base
- Fuel Proof spring rewind hose reel with 20m x 1” Elaflex aviation fuel hose
- ZVF25 high flow manual nozzle, complete with earth lead and dust cap
- 20m earth bonding reel
- Fire extinguisher
- Offset fill pipe (2” BSP connection)
Technical Information
Length |
7201 mm |
Width |
2299 mm |
Height |
2711 mm |
Empty Weight |
5000 kg |
Full Weight |
10220 kg |
Maximum Hose Length |
30 m |