Key Features
- Horizontal double skinned integrally bunded construction
- Heavy duty 304L grade stainless steel inner tank with manway access
- Built in accordance with CAA guidelines for aircraft re-fuelling equipment
- Inspection hatch
- 5mm & 6mm thick S275 grade mild steel outer bund. 110% tank capacity
- Double broad cradle base with 1:40 angled fall to sump low point
- Lifting eyes suitable for lifting and moving empty tank
- Open fronted design for easy access to fuel dispenser, with rain peak and galvanised pump stand
- Premium extra cabinet with vented side entrance door giving access to filters, reel and offset fill line etc.
- Side cabinet with roller shutter door
- Fill point – 2” stainless steel with Self Climat OPD Overfill Valve DN50 type NT- Jet A1 / Avgas
- Normond analogue hydrostatic tank contents gauge
- 1” stainless steel sump draw line
- Shot blasted to SA 2.5 and painted in 2-pack polyurethane finish (standard White)
- Suitable for use with Avgas or Jet A-1
Standard Specification
- Pumptronics Series C Commercial fuel dispensing unit with stainless steel body and digital readouts
80 to 90 litre/min flow rate*, ATEX Exd IIB T4 230V 50Hz motor. Approved by UK Weights and Measures.
Measuring Instrument Directive approved - Stainless steel pump internals with full air separation
- Dual Facet VF-22SB filter vessel tested to EI/API 1581 (5th edition). Differential pressure gauge & water drain
- FG-0-612-2 filter cartridge to EI/API 1583 (4th edition) (particle & water blocking, 0.5 micron)
- Facet CC-22-7 Coalescer Cartridge to API 1581 5th edition
- Fuel Proof hydraulic powered hose reel with 30m x 1” Elaflex HD25 hose to EN 1361, API 1529 C
- ZVF25 manual refuelling nozzle with removable fine mesh strainer, complete with earth lead and dust cap.
- 30m hand rewind earth bonding reel
- Fuel Proof fuel sampling, inspection and recovery system, with 4L Closed Circuit Sampler
- EX50 230V sump pump & return pump (fitted with return Facet VF-22SB filter vessel, complete with coalescer filter element)
Optional Extras
- Floating suction arm (recommended best practice) (50mm NB Sch 5 304L stainless tube)
- Self-loading pump, centrifugal stainless steel, 2.2kW 230V Exd IIB T3 motor
- Input filtration, EI 1590 Qualified 2 micron particle element, in stainless steel vessel
- Galvanised anti-slip staircase and manway access platform. Hand rail for easy & safe access, BS compliant. (incl. UK installation. Increases overall height by 1m approx. Customer to confirm compliance with site height restrictions).
- ATEX Zone 1 HDL 100 - Ex emb Fluorescent Luminaire IP66/67 T4/T5 Gas & Dust
- External area flood lights and mounting poles, with dawn to dusk light controller
- Dry break coupling on fill point (Jet A-1 type)
- Nozzle earth lead
- Nozzle dust cap (Please note that the fitting of this cap can interfere with the stowing of the nozzle in the holder)
Technical Information
Length |
10800 mm |
Width |
2900 mm |
Height |
3500 mm |
Empty Weight |
10500 kg |
Full Weight |
43700 kg |
Maximum Hose Length |
30 m |