print header

3,200 Litre Bulk Aviation Fuel Tank

3,200 Litre Bulk Aviation Fuel Storage Tank

Industry leading bulk storage and refuelling system for Avgas & Jet A-1

  • Horizontal double skinned integrally bunded construction comprising of:
    Grade 304 stainless steel inner tank with bolted manway access.
    Heavy duty mild steel outer bund. 110% tank capacity
  • Strong steel base with integral fork lift pockets; 40mm fall to sump low point 
  • 2 point lifting eyes suitable for lifting and moving empty tank
  • Fill point & pump cabinet with anodised aluminium roller shutter door or heavy hinging steel door
  • Fill point – 2” BSP stainless steel with Self Climat OPD Overfill Valve DN50 type NT- Jet A1 / Avgas
  • Suction line dip tube for fuel delivery – 1½” grade 304 stainless
  • Unitop hydrostatic tank level contents gauge         
  • 1” stainless steel sump draw line, with sump pump in cabinet for fuel sampling
  • Sample draw off point, inspection glass
  • Shot blasted to SA 2.5 and painted in 2-pack polyurethane finish (standard colour White) 
  • Suitable for use with Avgas and Jet A-1
  • Pumptronics Series C Mechanical fuel dispensing unit with stainless steel body and hand re-set mechanical flow meter.  80 to 90 litre/min flow rate*, ATEX Exd IIB T4 230V 50Hz motor. Not approved by UK Weights and Measures. Stainless steel pump internals with full air separation.  Approved to EN13617 (Atex)
  • Facet VF-22SB filter vessel tested to EI/API 1581 (5th edition). Differential pressure gauge & water drain
  • FG-0-612-2 monitor filter cartridge to EI/API 1583 (4th edition) (particle & water blocking, 0.5 micron)
  • Spring retractable hose reel, with 20m x 1” Elaflex hose to EN 1361:1997
  • ZVF25 manual trigger with integral filter, complete with earth lead and dust cap.
  • 20m retractable earth bonding reel
  • Fire extinguisher
  • Floating suction arm (recommended best practice) (50mm NB Sch 5 304L stainless tube)
  • Self-loading pump, centrifugal stainless steel, 2.2kW 230V Exd IIB T3 motor
  • Input filtration, EI 1590 Qualified 2 micron particle element, in stainless steel vessel
  • Side access / inspection steps – 3,200L to 7,500L
  • Side access / inspection steps –10,000L
  • ATEX Cabinet Light - Zone 1 HDL 100 - Ex emb IP66/67 T4/T5 Gas & Dust
  • Dry break coupling on fill point (Avgas type)
  • Nozzle earth lead
  • Nozzle dust cap (Please note that the fitting of this cap can interfere with the stowing of the nozzle in the holder)
Top

loading