Filters & Elements

Online Catalogue |  Filters & Elements

Diesel particle filter Using an effective particle filter is a top priority for any refuelling application. By ensuring the fuel is kept clean the risk of pump or vehicle damage will be significantly reduced. The diesel particle filter removes microscopic particles (10 microns) of rust, dirt sand etc. and has a minimal effect on the overall flow rate. The see-through bowl enables visual monitoring of fuel flow. Ideal for construction, farm, light industrial or recreational use. - Clear bowl, water drain point and replaceable element - Large filter surface for efficient action - Can be used individually or with a fuel water filter - 1" connections - Suitable for use with diesel and gas oil - Dimensions (LWH): 9cm x 9cm x 25cm - Weight: 1kg Price: £25.95 (Excluding VAT at 17.5%) Quantity:

Replacement element for diesel particle filter Replacement element for the above filter unit. The filter element should be checked regularly and replaced when necessary. Price: £8.50 (Excluding VAT at 17.5%) Quantity:

Racor FDW51125 water absorbing diesel filter With a large filter surface area and high flow rate, this unit is suitable for a wide range of applications, including commercial vehicle, industrial and agricultural use. The filter removes almost 100% of contaminants such as rust, dirt, dust and water from the diesel. The elements feature a highly absorbent chemically treated media that absorbs around 25 times it's own weight in water. As the the media absorbs more water it swells, gradually reducing the flow until it stops completely - indicating the cartridge needs to be replaced. - Nominal micron rating: 25 micron - Flow rate up to 176 litres/min - Port size 1¼" NPT - Dimensions inc. filter head (LWH): 13cm x 13cm x 33cm - Weight inc. filter head: 2kg Price: £91.34 (Excluding VAT at 17.5%) Specification Complete unit inc. filter head (£91.34)Cartridge only (£45.09) Quantity:

Brass 'Y' strainer Brass body DIN 17660. PN-16. Stainless steel sieve AISI 316. Minimum particle size 300 microns. Female BSP threaded ends. Max temp 140 degrees celsius. Size 1" (£5.67 + VAT)1½" (£14.19 + VAT)2" (£24.34 + VAT) Quantity:

Alloy angle filter - 90° alloy filter - Ideal for removing large particles of dirt from the system - Stainless steel filtering case - 400 micron - 1" connections - Suitable for use with most fuels Price: £18.61 (Excluding VAT at 17.5%) Quantity:

Online Catalogue |  Filters & Elements

Enter any special delivery instructions: