Online Catalogue

 

 


HomeSite MapSearchCheckout Store TopUp a LevelContact Us



Product Sections






Best Sellers

Online Catalogue |  Best Sellers

Replacement element for diesel particle filterReplacement element for diesel particle filter
Replacement element for the above filter unit. The filter element should be checked regularly and replaced when necessary.

Price: £8.50 (Excluding VAT at 17.5%)

Quantity:  

Diesel particle filterDiesel particle filter
Using an effective particle filter is a top priority for any refuelling application. By ensuring the fuel is kept clean the risk of pump or vehicle damage will be significantly reduced. The diesel particle filter removes microscopic particles (10 microns) of rust, dirt sand etc. and has a minimal effect on the overall flow rate. The see-through bowl enables visual monitoring of fuel flow. Ideal for construction, farm, light industrial or recreational use.

- Clear bowl, water drain point and replaceable element
- Large filter surface for efficient action
- Can be used individually or with a fuel water filter
- 1" connections
- Suitable for use with diesel and gas oil
- Dimensions (LWH): 9cm x 9cm x 25cm
- Weight: 1kg

Price: £25.95 (Excluding VAT at 17.5%)

Quantity:  

GPI HP-100 hand pump (80 litres/min)GPI HP-100 hand pump (80 litres/min)
The GPI HP-100 is the industry standard dual-action piston hand pump. The pump can be used with a wide range of fuels including diesel, gas oil and petrol, and is capable of flow rates up to 80 litres/min (depending on setup of dispensing system). On the half stroke setting, the pump delivers at around half the maximum rate but is easier to operate.

- Dual-action piston hand pump
- High flow rate up to 80 litres/min
- Ideal for high-volume fuel transfer
- Tough aluminium construction
- 1" inlet, ¾" outlet
- Dual flow rate - easy-to-change stroke settings
- Suitable for use with diesel, gas oil and petrol

Price: £118.24 (Excluding VAT at 17.5%)

Quantity:  

Reinforced diesel hose - per metreReinforced diesel hose - per metre
Suction and delivery hose for diesel and mineral oil. This hose is ideally suited to the hydraulic, agriculture and chemical markets. With a unique construction, this hose more durable and more flexible than other types of hose commonly used in these types of application. The hose is made from a specially compounded alloy of NBR (nitrile rubber), TPV (Thermoplastic Vulcanizate) and PVC (Polyvinyl chloride).

- Features antistatic copper wire
- Working temperature -30°C +80°C, -22 F + 186F
- Working pressure: 10 bar

Size


Quantity:  

12V ATEX approved pump (up to 57 litres/min**)12V ATEX approved pump (up to 57 litres/min**)
The industry standard 12V DC electric pump, this unit is compact and reliable and delivers flow rates up to 57 litres/min**.

- ATEX approved fuel transfer pump
- Thermal overload protection
- Ball bearing construction - no lubrication required
- ¼ HP 12V 20A motor
- Integral check valve and relief valve
- Built in bypass valve
- Machined carbon vanes
- Iron rotor
- Heavy duty battery cable
- Suitable for use with diesel & petrol

** This is the maximum output without filters, nozzles etc. Actual output will be around 50 - 70% of this figure

Price: £370.00 (Excluding VAT at 17.5%)

Quantity:  

4 stroke petrol engined pump (250 litres/min)4 stroke petrol engined pump (250 litres/min)
The 4-stroke Honda petrol engined pump is widely used for fuel transfer applications requiring reliability, high flow rates and value for money. This pump is suitable for use with B5 Biodiesel (5% biodiesel, 95% diesel mix).

- Centrifugal pump with cast iron impeller
- Recoil start and oil alert
- Suction head 8m
- 2" female ports
- Suitable for use with diesel and gas oil
- Suitable for use with B5 biodiesel

Price: £335.00 (Excluding VAT at 17.5%)

Quantity:  

35 litre fuel spill kit35 litre fuel spill kit
40 litre spill kit in high visibility bag. Kit contents: 3 x 1.2m socks. 20 x soak up pads. 1 x disposal bag. Instruction manual

Price: £45.79 (Excluding VAT at 17.5%)

Quantity:  

3 digit flow meter3 digit flow meter
- Reliable and inexpensive - easy to install
- Flow range of 10 - 120 litres/min
- Precision +/- 1% of flow range
- Mechanical readout device with rotating wheels
- Aluminium metering chamber. Polybuylene nutating disk
- 3-digit subtotals (max 999 litres)
- 6-digit non-resettable totaliser
- Suitable for use with diesel and gas oil
- 1" connections


Price: £111.98 (Excluding VAT at 17.5%)

Optional angle filter


Quantity:  

Diesel engined pump (100 - 250 litres/min)Diesel engined pump (100 - 250 litres/min)
Heavy duty diesel engine driven pump with electric start. This unit combines superb reliability with high flow rates, and is ideal for a wide range applications including agriculture, industry, and commercial vehicle operations.

- Diesel engine driven
- Self-priming pump
- Carbon & ceramic mechanical seal
- Buna-N seals and o-rings
- Stainless steel fasteners
- Glass reinforced polyester pump body
- Suitable for use with diesel and gas oil
- Suitable for use with B5 biodiesel

Price: £1,525.00 (Excluding VAT at 17.5%)

Select product type:


Quantity:  

Online Catalogue |  Best Sellers


© 2010 Fuel Proof Ltd  Contact Us | Privacy Policy | Terms & Conds